Bluetti Elite 300 Review

Every power station in this guide above 2kWh has made the same trade: more capacity means more weight, usually 99 pounds or more once you cross into the 3.6kWh tier. The Elite 300 is Bluetti's attempt to break that pattern — 3,014Wh of LFP capacity in a box Frost & Sullivan certified in January 2026 as the smallest 3kWh power station on the market by volume, at a shade under 58 pounds. That's close to the weight of the 2kWh-class Elite 200 V2 for half again the capacity.

The output ceiling is where the size savings show up. 2,400W continuous (4,800W in Power Lifting Mode for resistive loads) is enough for a fridge, a sump pump, a space heater, and lights simultaneously, but it trails the 3,600W-plus the EcoFlow DELTA Pro 3 and Jackery HomePower 3600 Plus deliver at a similar capacity and price. The same 6,000-plus-cycle LFP cells that make the Elite 200 V2 a good long-term bet carry over here, and the 1,200W solar input is respectable, if not class-leading.

Think of it less as a smaller DELTA Pro and more as a bigger Elite 200 V2: same output ceiling, same cell chemistry, same lack of expansion — just more watt-hours in roughly the same footprint. For buyers who've outgrown 2kWh but don't want to carry a 99-pound station up the basement stairs during an outage, that's a genuinely useful middle option. Being new to market, it doesn't yet have the owner-review history its Elite 200 V2 sibling has built up.